Other

ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura, or mount shifters directly to handlebars independent of brakes. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - MM-ISEV is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC EV brake - Designed to work with rear (right side) brakes and shifters. - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters. - MM-ISEV is compatible with M9100, M9120, M8100, and M7100 Brakes. Deore M6100 or M4100 brakes will mount but the positioning is not optimal so we would consider them not compatible. - MM-ISEV, MM-ISII, & MM-MAG: while they will technically mount to a Sram AXS shifter pod, we do not recommend it. With SRAM AXS, the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders. - Shimano I-SPEC A, Hope, and TRP brakes are not supported. - Shimano I-SPEC EV to Magura brakes is not supported because of geometric challenges. - ISII- 22 Clamp is compatible with Shimano XT M8000 and XTR M9000 shifters. - NOT compatible with Shimano SLX M7000, Deore M6000. - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque.

Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell. - Sold individually (two needed per frame) - Bearings: Enduro Dual-Row ABEC-3 - Color: Silver - Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 - Bottom Bracket Shell Width: 86.5mm – 132mm - Bottom Bracket Shell I.D.: 41mm - Flange OD: 42mm - Crank Spindle Diameter: 30mm - Over Bearing Width: 92mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 36g

Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 1-bolt

Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.

Replacement derailleur hangers for Salsa frames. - Salsa Derailleur Hanger 687

Original equipment rear derailleur pulleys for SRAM rear derailleurs. - NX/SX Eagle Rear Derailleur Pulley Kit

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

The Maxle Stealth offers a light, low-profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench

Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES - CHAIN GUIDE - ISCG05 - V2 - BASH GUIDE - ISCG05 - V2 - E-BIKE - STEPS/EP8 - Kit includes 1 two piece top guide

Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your post by lowering the travel and extended length of your post by as much as 50mm in any increment you like. Want an oh so fashionable 128.99mm drop? You got it! Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap, which is great for heavier riders. - Compatible with V1 Droppers only - 170mm Dropper Post - adjustable down to 120mm - 150mm Dropper Post - adjustable down to 100mm

Depending on the variant selected, these clamps/adapters allow users to mount their OneUp Components Dropper Remote (V2 or V3) to their Shimano I-SPEC-II brake lever (I-SPEC-II Adapter), Avid/SRAM MMX bar mount (SRAM MMX Adapter), Shimano I-Spec EV (I-Spec EV Adapter), flat bars (22.2 Clamp), or drop bars (31.8 clamp). The SRAM MMX, Shimano I-Spec EV, and the I-SPEC-II Adapters are not a clamps - these adapters allows the mounting/attachment of the remote body to a riders pre-existing clamp/brake mount. The 31.8 Clamp and the 22.2 Clamp are stand-alone clamps - these clamps allows the mounting/attachment of the remote body to a riders bars who do not have or do not want to attach the dropper remote body to a pre-existing clamp/brake mount. This product does not contain a remote body. This product is not a universal product, it will only work to attach/mount a OneUp Components Dropper Remote body (V2 or V3). The 31.8 Adapter is for use with drop bars only.

The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes. KIT INCLUDES - EDC TOP CAP - EDC steerer plug - 2x 1mm, 3mm, & 5mm Headset Spacers

ONLY COMPATIBLE WITH THE ONEUP REMOTE V3 Kit includes 1 dropper remote cushion

Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit. Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders. - 210mm Dropper Post - adjustable down to 190mm - 180mm Dropper Post - adjustable down to 160mm - 150mm Dropper Post - adjustable down to 130mm - 120mm Dropper Post - adjustable down to 100mm

BAT adjuster dial kit for Magura brakes.

- Raises the height of the handlebar on a threadless stem - Made of 6061 aluminium - Height gain: 50-80mm - 217g - 28.6mm

- Forged aluminum seatpost clamp and quick release

- Forged aluminum seatpost clamp and quick release

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Clean up your Bontrager Elite stem cockpit with Blendr Elite bases. Blendr works with this simple formula: Stem + Base + Mount. Add accessory. Key features: - Bases for use with Elite stem - Add any XXX accessory mount for an elegant integrated look

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Bontrager XXX Integrated bar/stem, as seen on the Emonda SLR 10 - Add any XXX accessory mount (sold seperately) for an elegant, integrated look