The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches\u001D or more
Versatile roof-mounted cargo box for everyday use. - Full trunk access with minimal risk of contact with the cargo box, thanks to its forward position on the vehicle roof - Maximum space efficiency across a wide range of vehicle fits - Easy to mount thanks to the PowerClick quick-mount system. The integrated torque indicator clicks when it’s properly mounted, ensuring fast and secure fitting - Comfortable to open and close thanks to the LockKnob that also helps to prevent damage to the Thule Comfort Key - DualSide opening provides easy access to all areas of the box, from either side of the vehicle
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
$899.95 - $949.95
Stylish and spacious roof-mounted cargo box, optimized for ease of use. - Easy to open and close in all conditions due to grip-friendly outer handles and supporting lid lifters - Full trunk access with minimal risk of contact with the cargo box, thanks to its forward position on the vehicle roof - Optimized design for best space efficiency, aerodynamics, and vehicle fit - SlideLock system with separate locking and opening functions, automatically locks the lid in place and indicates when the box is closed securely - Easy-to-mount thanks to the extra wide PowerClick quick-mount system. The integrated torque indicator “clicks” when it’s properly mounted, ensuring fast and secure fitting
The Yakima FlushBar has a signature look that seamlessly integrates with the shape of your modern vehicle. This crossbar with integrated towers has no bar overhang, so your vehicle will look like it came from the factory with FlushBars already installed. The FlushBar shape maximizes strength, while minimizing drag and reducing noise levels to nearly zero. It accepts almost all Yakima mounts and cargo boxes for adaptable, multi-sport versatility. A complete system consists of two FlushBars and a Yakima Fitting Kit. Please consult www.yakima.com to determine which Yakima Fitting Kit and which FlushBar sizes are required for your specific vehicle. Product Details: - Tower is integrated with the crossbar for a sleek, seamless appearance - WindRidge on the leading edge of the crossbar reduces noise and decreases drag - JetTruss internal support engineering adds serious strength for minimal weight - Patented SmartFill technology allows for easy install of T-slot style mounts, such as the Yakima HighSpeed with SmarT-Slot Kit 1 - Compatible with almost all Yakima mounts and cargo boxes. Consult Yakima's Fit My Vehicle Guide for a detailed list. - Anchors to your rooftop with vehicle specific Yakima fitting kits (sold separately). Consult Yakima's Fit My Vehicle Guide to determine which Yakima Fitting Kit is required for your vehicle. - Easily locks to your vehicle with Yakima's SKS system (sold separately)
The first load-assist mount to handle both SUPs and kayaks makes loading and unloading heavy boats and boards a breeze. The lightweight mount tilts down more than two feet from the roof rack, takes on up to 45% of the boat’s weight, then helps gently raise it up to the top of the vehicle. Once loaded, it securely cradles your boat or boards for the ride. At only 21 pounds, it’s super lightweight but built burly enough to wrangle an 80 pound load. Product details: - Easily load and unload kayaks and boards at waist level at the side of the vehicle with the easy to use slide and tilt mechanism - 80 lb. boat and board capacity easily handles a large kayak or two boards - Universal mounting hardware fits most roof racks - Lightweight materials and construction don’t eat up roof’s carrying capacity - Tilts down a lengthy 26" from roof rack height - Provides 30-45% weight assistance (depending on boat width) - Felt-covered cradles flex to conform to hull for secure transport - Folds down flat to reduce drag and noise when not in use - All tie-down straps included - Locks to base rack with SKS Lock Cores for added security (sold separately)
The Yakima RailBar is the premium crossbar choice for vehicles with factory-equipped raised siderails. This crossbar with integrated and easy-to-use towers has no bar overhang, so your vehicle will have a clean, modern aesthetic, looking like it came from the factory with the RailBars already installed. The sleek low-profile shape of the crossbar and its seamless integration to your vehicle’s siderails maximizes strength, while minimizing drag and reducing noise levels to nearly zero. It accepts almost all of Yakima's mounts and cargo boxes for adaptable, multi-sport versatility. A complete system consists of two RailBars. Consult Yakima's Fit My Vehicle Guide (www.yakima.com) to determine which RailBar sizes are required for your specific vehicle. Product details: - Tower is integrated with the crossbar for a sleek, seamless appearance - WindRidge on the leading edge of the crossbar reduces noise and decreases drag - JetTruss internal support engineering adds serious strength for minimal weight - Patented SmartFill technology allows for easy install of T-slot style mounts, such as the Yakima HighSpeed with SmarT-Slot Kit 1 - Compatible with almost all Yakima mounts and cargo boxes - Anchors to your rooftop with vehicle specific Yakima fitting kits (sold separately). Consult Yakima's Fit My Vehicle Guide to determine which Yakima Fitting Kit is required for your vehicle. - Easily locks to you vehicle with our SKS system (sold separately)
-Extends the Mini Skinny by 14" -Integrated 9mm Fork Mount -Retains 50% of usable crossbar space -Locking roof bar mounts -Basket comes fully assembled
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24\u001D inches or more
The SUPDawg makes launching your board easier than ever! Comes fully assembled out of the box, features integrated rollers for easy loading and includes SKS locks for aprés-paddle security. Holds up to two 36" wide boards. -Fully assembled out of the box -Tool-free installation Integrated rollers for easy loading of oversized SUP boards -Fits Yakima round, factory, aero and square bars -Slider adjusts to boards up to 36" wide -Soft padding cradles and protects boards -Integrated strap management stows straps during travel -Premium, sleek glossy black finish compliments modern vehicle types -Includes everything needed to carry up to 2 SUP boards -SKS Locks included; locks racks and board -Minimum crossbar spread of 24\u001D inches or more
A complete base rack system for vehicles with raised roof rails. Combines TimberLine towers with 50" CoreBar. - Complete base rack system for vehicles with raised roof rails - Combines TimberLine towers with 50" CoreBar - No clips required
$74.99 - $149.99
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
Always forgetting the thru-axle adapter for your roof rack? Kuat solved that problem for you: The TRIO can handle almost any bike you own. The unique mounting system fits quick release as well as 15mm and 20mm thru-axles. It will even play nice with fat bikes with the optional adapter kit (sold separately). The TRIO mounts to most factory and aftermarket crossbars and features an integrated cable lock. - 1 Bike Capacity (45 lbs max) - 3 Way Mount-Fits 9, 15, & 20 mm forks out of the box - Optional adapter kit for fat bikes (sold separately) - Mounts to most factory & all aftermarket cross bars - Integrated Cable Lock (locks both frame and rear wheel) - Sliding rear tire strap - Up to 4 feet between cross bars. - Max crossbar size-3.5” wide by 1.7” thick - Weight-7 lbs - Dims-56” x 4” x 1 3/8”
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), and the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your vehicle, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
No matter where you go, Yakima's Raptor Aero keeps your bike securely in place. It's especially convenient because no bike disassembly is required. You'll love this if you have bolt-on or hard-to-remove wheels. Plus, the Raptor's padded jaws hold most bicycles tight yet won't scratch the paint. The Raptor comes with two ratcheting wheel straps and fits most crossbars right out of the box.
Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.
Yakima's LoadStop brackets prevent your loads from shifting side to side, without having to stuff a whole bunch of folded-up blankets onto your roof. FEATURES: - Carries ladders and lumber with sturdy L-shaped brackets - Safely holds loads by preventing lateral shifts with grippy ribbed surface - Holds thicker, taller loads with a higher vertical edge - Compatible with Yakima crossbars only - Works well when paired with Heavy Duty Straps (sold separately) - Set of 4 brackets
The perfect combination of form and function, the Vagabond X increases your vehicle’s load capacity by a staggering 160 pounds – and that can include up to two bikes with 9mm skewers. With locking mounts, two 9mm skewers and the capacity to accommodate even larger loads with the Xtender, this Vagabond pulls its weight and more. Includes all the functionality of the Vagabond to get your bikes and gear on the road with ease, and we dare you to find a better-looking roof basket on the market. A bit showier than the original, the Vagabond X features locking mounts. - Locking mounts provided - 2 integrated 9mm front skewer mounts - 160lb Load capacity - 2 Bike - 50 lb max for each - Silver decals on front and side - Ability to add an extension (Xtender) making the rack 73" long - 41" x 52" x 7" - Mounts to most factory and aftermarket roof bars
No longer will you have to decide between the turkey fryer, pop up tent, folding love seat, chef kitchen, dog tent, and a 128 capacity cooler. The Xtender adds 21 inches to the Vagabond X and comes with burly load bars for all your other toys. Leave nothing behind. - Comes with 2 load bars - Adds 21" to your Vagabond X - 160lb total load capacity - Makes Vagabond X 41" x 73" x 7" - Load bars measure 44"
Yakima's caged beast offers monstrous carrying capacity. The MegaWarrior is a perfect fit for mid- to full-size sport-utility vehicles and it's made of heavy-duty steel. You can easily attach bike mounts directly with its movable accessory bar and a custom fairing is included to cut wind noise and protect your cargo. The MegaWarrior's universal mounting hardware fits round and square crossbars, plus many factory racks, too.
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to add Thule square crossbars. The feet mount without tools, are vinyl-coated to protect your vehicle, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how much gear you carry, and most are sealed from the elements to protect the internal mechanism.
Ultra premium lift assist carrier reduces up to 40lbs of a kayak's weight and allows side of vehicle loading, unloading, and strapping. Features - Gas struts lift and lower 40lbs or 90% of the kayaks weight - Load and unload kayaks at waist level, at the side of the vehicle for greater convenience and safety - Double extending arms lower the kayak up to 40” for faster loading and unloading - Corrosion-resistant kayak cradles expand to fit wide kayaks - 8 touch points of padded support for maximum protection for your kayak - Aluminum, double coated steel construction for corrosion resistance delivers a longer product life - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs Technical specifications - Load capacity Water Crafts: 1 kayak - Fits Aero Profile: Yes - Fits SquareBar: Yes - Lockable: Yes - One Key System compatible: Yes - Factory rack mounting hardware included: No - Carrying type: Lift Assist
$239.99 - $259.99
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Page 1 of 3 Next page