Chainrings

The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets, including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. - Elliptical rings provide smoother, more efficient pedal rotation, which means better traction - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with the SRAM RED and Force AXS 8-bolt interface - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 3mm offset is designed for boost cranksets (52mm chainline)

SLX SM-CRM75 stiff and lightweight chainring delivers smooth pedaling over bumpy terrain. The SM-CRM75 chainring features SHIMANO DYNAMIC CHAIN ENGAGEMENT+ technology, which features special gear teeth profiles that deliver exceptional chain engagement and chain retention. - Special MTB gear teeth profile improves chain engagement and retention - Exchangeable single/double chainring - Crankset can be used as common component - Superior chain retention - Rider tunable

Shimano's Ultegra 6800 chainrings provide confidence-inspiring shifting and category-defining speed. Cold-forged aluminum comprises these super-stiff, hollow outer rings, and Shimano's unique system of ramps and pins means lightning fast shifts are at your command. - Bolt circle diameter: 4-bolt 110mm asymmetric - 50T pairs with 34T inner ring - 52T pairs with 36T inner ring - 53T pairs with 39T inner ring Inner rings sold separately

Shimano Ultegra R8000 Series Chainrings are designed for use with Shimano's 11-speed Ultegra crankset.

- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Specially designed tooth profiles for improved wear - More durable finish - Bolt Circle Diameter (BCD): 107 BCD - Speeds: 12 - Material: Aluminum

SRAM X-SYNC 2 1x chainrings provide a high level of performance and durability. The aggressive teeth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the design reduces friction and the accumulation of mud, grit, and grime. - The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain - X-SYNC 2 chainring design increases chain retention, improves durability, and reduces friction and noise - Designed to be used with Eagle chain - 104mm BCD

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel

The radical new look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear. - Can be used with Eagle 12 speed or SRAM 11 speed chains - Direct mount rings with 3mm offset fit Boost geometry Eagle cranks; direct mount rings with 6mm offset fit traditional geometry - Eagle cranks and GXP spindle XX1, X01, X0, X1 and X9 cranks

12 Good Reasons If you're looking for a bomber new chainring that can run with your Shimano 12 speed drivetrain, then look no further. This direct mount ring has the versatility of RF CINCH integration and the stiffness to turn all your "push" into straight-up "go". Built to Last Created from 4mm-thick 7075-T6 alloy plate for big-time stiffness and strength. Its NW tooth profile is Shimano 12-speed specific and provides secure chain retention All-Round Performer The Race Face CINCH interface makes this direct mount chainring fast and easy to swap for different sizes to customize your Shimano 12-speed drivetrain. - Compatible with Cinch Direct Mount Cranks - 7075 Aluminum - Direct Mount

Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. - Compatible with 9, 10, 11, and 12 speed - Narrow Wide tooth profiling ensures consistent chain retention - Lockring installed/removed with ISIS BB tool - Stiff 4mm plate thickness to transfer loads without flexing

• New asymmetrical tooth profiling and more upshift and downshift zones yield instantaneous, smooth and quiet shifting • CNC-machined from super-hard AL-7075 to maximize wear resistance and impact strength • Three times stiffer than Team and Race rings • 3x10 chainrings are compatible with 9-speed drivetrains if a complete set is used

FSA Super Road Chainrings are designed to provide flawless shifting, with minimal weight and unmatched durability. - Precision CNC machined AL7075/T6 alloy - N-11 chainrings are compatible with all 10 speed drivetrains, and compatible with FSA, SRAM and Shimano 11- speed drivetrains

- BCD: 110 - Chainring Bolts: 5 - Chainring Comp: Double - Teeth: 50 - Primary Color: Black - Material: Aluminum - Position: Outer - Speed: 11

- CNC-machined 7075 T-6 Aluminum - For singlespeed & 1X drivetrains - Cut from .160" material for strength and long life - For use with 9 or 10-speed drivetrains - Anodized with laser-etched graphics

These CNC’d lovelies will work just fine in a multi-ring setup, but they’re not equipped with shift ramps or pins, which makes them perfect for single-ring drivetrains. - Longevity, performance, and quiet operation - Material: CNC-machined 7075-T6 Aluminum - Chain Compatibility: 8-, 9-, or 10-speed compatible

416 stainless steel is not the first material choice for most component manufactures looking to use stainless steel (most use soft 300 series). That is because 416 is hard...hard because the raw billet is expensive, hard because it takes a long time to machine. However, that did not stop Wolf Tooth because there is no denying that it is the best material for those that need the ultimate durability in a chainring. These stainless steel chainrings are not only beautiful, but they will last 5-10 times longer than their aluminum versions. Compatibility: - These are functionally the same as the aluminum 104 BCD rings. - These rings fit any 104 BCD crankset. - 30t x 104 ring is the only Quarq power meter compatible 30t ring available. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most boost bikes

The Wolf Tooth 110 BCD Asymmetric Chainrings are designed for use with Shimano GRX cranks. Chainrings feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention, and mud clearance. - Compatible with Shimano GRX cranksets including RX600 and RX810 - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Use of a clutch-style rear derailleur is recommended - Made from 7075-T6 aluminum for long life

Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).

The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with Shimano Asymmetric 110 BCD cranks or Campagnolo CX10/11 cranks - Use of a clutch-style rear derailleur is recommended - Made from 7075-T6 aluminum for long life

The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain. - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with Shimano Asymmetric 110 BCD Cranks or Campagnolo CX10/11 cranks - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended

Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM chainring. There are 3 offsets: 0mm, 3mm, and 6mm - 49mm chainline, 0mm offset for BB30 short-spindle cranks - 52mm chainline, 3mm offset BB30 - 47mm chainline, 6mm offset for cyclocross and road cranks - 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost Notes for use with Fat Bikes: - If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. - If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset

The Wolf Tooth 64 BCD Universal Chainring is the perfect solution when you need something smaller than a 30t on your 104/64 BCD cranks or your 11-speed Shimano XT and SLX 96/64 BCD cranks. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - For use with 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Chainline is 46mm on a triple and 48mm on a double crank - Chainline on a standard M8000 or M7000 crankset is 48mm and 50mm on a boost version

Designed to fit 94 BCD 4-Bolt cranks such as the SRAM X1 crank, these rings will provide maximal chain retention and minimal noise. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - 49mm chainline - Use of a clutch-style rear derailleur is recommended

Designed to fit Shimano 4-arm 96 Asymmetric BCD XT M8000, SLX M7000, or Deore M6000 1x or 2x cranksets. These rings feature Drop-Stop tooth profiles for mud clearance, chain retention and durability. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075 Aluminum for long life - Use of a clutch-style rear derailleur is recommended

This chainring's tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain. - Compatible only with Hyperglide+ chains - Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with optimal chain retention - Prevents premature ring and chain wear that can come from non-optimized profiles - Chainrings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksets - Use only the stock Shimano XTR chainring bolts (M7) - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended

The Wolf Tooth 96 BCD chainring is designed to fit 4-arm Shimano XT M8000 and SLX M7000 cranksets.The tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain. - These rings fit on Shimano XT M8000 and SLX M7000 1x or 2x cranksets - Compatible only with Hyperglide+ chains - Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with optimal chain retention - Prevents premature ring and chain wear that can come from non-optimized profiles

- Engineered to be quiet and smooth - Patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability - Prevents premature ring and chain wear that can come from non-optimized profiles. - 6mm offset - Chainline 45mm - Weight: 38t - 81 g | 40T - 87g | 42t - 97g | 44t - 117g - Material: 7075-T6 aluminum - Made in the USA Compatibility: - Use Drop-Stop B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, SRAM Flattop, Campagnolo, KMC - For all SRAM Direct Mount DUB road cranksets use the 8-bolt mounting standard

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended