Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Protective/Armor

$89.95
Ultralight, Movement-Friendly MTB Elbow Guards The Enduro D3O Elbow Guard offers our highest level of protection in an ultra-light, pedal-friendly design. The slip-on design with CE certified D3O impact-absorbing inserts provides you with minimal restrictions and maximum benefits. Features - EN1621-1 Level 1 Elbow including high and low temperature conditions - CE certified D3O insert for world-leading impact protection - Moisture-wicking, open stretch mesh at back of knee for breathability - Cordura fabric offers higher abrasion resistance in key impact areas - Reinforced skid plate reduces friction with the ground in a sliding fall - Removable D3O Insert for easy washing Construction - 70% PU / 20% polyester / 10% nylon
$75.96 - $94.95 $89.95 - $94.95 Up to 20% Off
Our Enduro Elbow Sleeves are trail tuned and offer pedal-friendly protection on the trail. Made from a moisture-wicking micro-lycra material and featuring a nylon mess rear panel, they keep the air flowing as you pedal up and earn the down. They allow full range of motion, thanks again to that high-stretch rear panel, and keep your elbows safe from hard trail knocks with the removable D3O elbow inserts that deliver both protection and comfort as you ride. - Moisture wicking micro-lycra sleeve with nylon mesh rear panel for increased airflow - Removable D3O elbow inserts for the perfect balance of comfort and protection - Silicone grip top and bottom to hold the guard in place - Nylon, spandex micro lycra
$99.95 - $104.95
Our Enduro Knee Sleeves are trail tuned and offer pedal-friendly protection on the trail. Made from a moisture-wicking micro-lycra material and featuring a nylon mess rear panel, they keep the air flowing as you pedal up and earn the down. They allow full range of motion, thanks again to that high-stretch rear panel, and keep your knees safe from hard trail knocks with the removable D3O elbow inserts that deliver both protection and comfort as you ride. - Moisture wicking micro-lycra sleeve with nylon mesh rear panel for increased airflow - Removable D3O knee inserts for the perfect balance of comfort and protection - Silicone grip top and bottom to hold the guard in place - Nylon, spandex micro lycra
$103.96 - $129.95 $114.95 - $129.95 Up to 20% Off
Guards against those elbow blows The Enduro Pro Elbow Guards are designed to give you the confidence of maximum protection against sneaky trail blows from branches and more, while minimizing the extra bulk and weight so you can still move freely. Slide them on and rip down the trail, and in no time you’ll be singing the praises of the moisture-wicking micro-Lycra sleeve that breathes easy and keeps you fresh. The custom-molded D3O® elbow insert will take whatever your next run throws at you, so go ‘bows out, flat out, and shred with confidence in the Enduro Pro Elbow Guards. - Designed to offer maximum protection while minimizing bulk and weight - Moisture wicking micro-Lycra sleeve with nylon mesh forearm panel for increased airflow - Custom molded D3O® elbow inserts designed by and exclusive to Fox - Slip-on design for reduced bulk - Silicon grip top and bottom to hold the guard in place - D3O® elbow inserts are removable for convenient and quick washing - Elbow inserts are EN1621-1 Level 1
$139.95 - $144.95
Knee guards built to pedal and protect. You want that knee protection, but you don't want to sacrifice mobility and pedal efficiency. The Enduro Pro Knee Guards are designed to deliver maximum 'hard knock' protection while keeping the bulkiness to a minimum. Slip them on and they'll stay right where you put them thanks to the rear elastic strap and silicon grip. Sweat isn't an issue either, thanks to their moisture-wicking material and mesh rear panel to keep the air flowing while you shred. - Designed to offer maximum protection while minimizing bulk and weight - Moisture-wicking micro-Lycra sleeve with nylon mesh rear panel for increased airflow - Custom molded D3O® knee inserts designed by and exclusive to Fox - Slip-on design for reduced bulk - Rear elastic strap and silicone grip top and bottom to hold the guard in place - D3O® knee inserts are removable for convenient and quick washing - Knee inserts are EN1621-1 Level 1 - Note: No technology or product can fully prevent the risk of injury or death
$334.95
- Impact absorbing D3O armor provides ce-level coverage while conforming to your body for a full range of motion in high and low temperature conditions - CE EN1621-1 level 1 elbow, shoulder, and chest protectors - CE EN1621-2 level 2 central back protector with removable insert to comfortably fit a neck brace - Articulated YKK front zipper and elastic adjustment straps for secure fit - Moisture-wicking, breathable, form fitting stretch main body fabric - Strategically placed open stretch mesh for ventilation - Spacer mesh positioned under chest and back guards for increased comfortability and breathability - All armor inserts are removable for easy washing
$274.95
Impact-absorbing D3O armor provides CE-level coverage while conforming to your body for a full range of motion in high and low-temperature conditions. - CE EN1621-1 level 1 chest protector - CE EN1621-2 level 2 central back protector with removable insert for neck brace compatibility - Articulated YKK front zipper and elastic adjustment straps for a secure fit - Moisture-wicking, breathable, form-fitting stretch main body fabric - Strategically placed open stretch mesh for ventilation - Spacer mesh positioned under chest and back guards for increased comfortability and breathability - All armor inserts are removable for easy washing
$149.95
Armored base short offering concealed coverage. Baseframe Pro Shorts offer superior comfort and lightweight impact resistance in strategic areas. It has a slight compression fit with Poron® hip and tailbone pads for a great balance of comfort and coverage. Key Features and Specifications: - Low-profile hip guard and knee-brace sock in one single unit - Articulated multi-paneled main body construction - Anatomically shaped 6 mm Poron® molded foam hip, thigh, and tailbone pads offer world-class impact protection - Stretch nylon/spandex with compression for superior stretch and comfort - Stretch-elastic waist moves with you as you ride and offers a secure fit - Elastic waistband ensures proper fit and keeps short in place under racewear Materials: 64% polyamide nylon, 19% polyurethane, 17% elastane Care: - Machine wash cold & gentle - Use a gentle detergent - Line dry - Do not bleach - Do not iron - Do not dry clean
$209.95
LOW PROFILE UNDER SHORT THAT MEETS CE LEVEL HIP PROTECTION STANDARDS - Removable CE EN1621-2 Level 1 Certified hip inserts feature world-leading impact protection technology by D3O® - Nylon spandex main body material for maximum mobility and increased durability - Dual-Density COMP chamois for maximum comfort in the saddle - Wide elastic lower leg keeps your short in place while pedaling - Left thigh storage pocket for carrying small essentials - D3O® inserts are removable for easy washing
$274.95
Low-profile sleeveless baselayer guard The Baseframe Pro Short Sleeve is a breathable baselayer with built in guards on the shoulder. It's designed to be worn under your jersey for low-profile coverage. It includes a removeable back insert, increasing your impact protection, while the fabric wicks away sweat as you ride and keeps you cool. The Baseframe Pro will fit snug and secure—the polymer softens to conform to your body as it is warmed by your own heat—offering minimal restrictions and maximum benefit. The more you ride, the better it feels. - Exceeds EN1621-1 level 1 back certification including high and low temperature conditions - Removable CE certified D3O Viper back insert features world leading impact protection technology - Large perforation and flex grooves in the back foam contours and flexes with rider movement - EN1621-1 Level 1 D3O shoulder inserts for additional protection - Body heat activates (softens) the polymer to conform to body - Moisture wicking, open stretch mesh for breathability CERTIFICATIONS - Exceeds EN1621-1 level 1 back certification - EN1621-1 level 1 shoulder inserts for additional protection
$234.95
Moisture-Wicking Baselayer with Integrated Back and Hip Guards The Baseframe Pro Sleeveless base layer provides moisture management, cooling, and protection in a single low-profile unit. Designed to be worn under your jersey, it provides EN1621-1 Level 1 back protection. Hip pads provide additional protection. Features - EN1621-1 Level 1 Back including high and low-temperature conditions - CE Certified D3O back insert world-leading impact protection technology - Large perforation and flex grooves in the back foam contours and flexes with rider movement - Body heat activates (softens) the polymer to conform to body - Moisture-wicking, open stretch mesh for breathability - Built-in padding at hips offers additional comfort - D3O back insert is removable for easy washing Construction - 35% PU / 37% nylon / 8% polyester / 20% Eva
$324.95
Ultra-light compression base layer with integrated D3O® knee protection and dual-density chamois. - Superfabric knee skid plate for reduced friction and maximum abrasion resistance in the event of a fall - CE certified D3O® knee inserts for world-leading impact protection - Molded Poron® side panels for added hip protection - Dual Density EVO Chamois for added comfort in the saddle - Super lightweight breathable 3/4 length tight provides seamless comfort - 78% Polyamide Recycled / 22% Elastane Knit Jersey
$159.95
LOW PROFILE UNDER SHORT DESIGNED FOR INCREASED COMFORT AND PROTECTION - Nylon spandex main body material for maximum mobility and increased durability - Molded hip protection conforms to your body and is designed to protect against impacts - Dual-Density COMP chamois for maximum comfort in the saddle - Wide elastic lower leg keeps your short in place while pedaling
$44.95
Replacement D3O Viper Back Insert
$109.95
Minimal restrictions, maximized benefits. - D3O® inserts for world-leading impact protection - Moisture-wicking, open stretch mesh for breathability - Anti-microbial treatment reduces odor-causing bacteria - Abrasion resistant elbow panel for added coverage in a fall - Removable - D3O® inserts for easy washing - EN1621-1 Level 1 certified - 76% Nylon 24% Spandex Micro Lycra
$119.95
Minimal restrictions, maximized benefits - D3O® inserts for world-leading impact protection - Moisture-wicking, open stretch mesh for breathability - Anti-microbial treatment reduces odor-causing bacteria - Abrasion-resistant knee panel for added coverage in a fall - Removable - D3O® inserts for easy washing - EN1621-1 Level 1 certified - 76% Nylon 24% Spandex Micro Lycra
$29.95
Replacement F3 Armor Knee Inserts
$39.95
Replacement elbow inserts for Enduro D3O Elbow Guard. Sold in pairs.
$29.95
Replacement D3O impact-absorbing inserts. Sold in pairs.
$99.95
Slip-On Elbow Guards Designed with D3O The Launch D3O Elbow Guard offers an excellent combination of impact-absorbing protection with a value-focused build. The CE-certified D3O insert works seamlessly with the slip-on design of the guard to provide all-day comfort and the confidence to try new trails. Features - CE certified D3O insert for world-leading impact protection-?EN1621-1 Level 1 CE Certification - Pre-curved ergonomic fit - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability Construction - 20% nylon / 40% SBR / 30% PU / 5% polyester / 5% spandex
$119.95
Slip-On Knee Guards Designed with D3O The Launch D3O Knee Guard offers an excellent combination of impact-absorbing protection with a value-focused build. The CE-certified D3O insert works seamlessly with the slip-on design to provide all-day comfort and confidence. Features - CE certified D3O insert for world-leading impact protection-?EN1621-1 Level 1 CE Certification - Pre-curved ergonomic fit - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability Construction - 20% nylon / 40% SBR / 30% PU / 5% polyester / 5% spandex
$129.95
Slip-On Knee & Shin Guards Designed with D3O The Launch D3O Knee/Shin Guard offers an excellent combination of full-length impact-absorbing protection with a value-focused build. The CE-certified D3O insert works seamlessly with the slip-on design of the guard to provide all-day comfort and the confidence to try new trails. Features - CE certified D3O insert for world-leading impact protection - EN1621-1 Level 1 CE Certification - Anatomically-shaped and asymmetrical shin guards provide pedal-friendly comfort - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability Construction - 20% nylon / 40% SBR / 30% PU / 5% polyester / 5% spandex
$169.95
The Launch Elite Elbow Guards offer an excellent combination of impact-absorbing protection with a fit that ensures mobility while riding. The CE-certified D3O LP1 inserts provide world-leading impact protection, while the engineered SuperFabric skid panels deliver maximum durability and flexibility. Lightweight, and constructed in a minimal sleeve style, they'll bump up the comfort and flexibility while on the bike without sacrificing protection from trail hazards. Large elastic gripper panels help keep the guards in place while riding or during impact, and the material features an antimicrobial treatment to reduce odor-causing microbes. Shred with confidence with the protection of our Launch Elite Elbow Guards.
$204.95
The Launch Elite Knee Guards offer an excellent combination of impact-absorbing protection with a fit that ensures mobility while riding. The CE-certified D3O LP1 inserts provide world-leading impact protection, while the engineered SuperFabric skid panels deliver maximum durability and flexibility. Bonded Poron pods at the side of the sleeve give additional side knee coverage. Lightweight, and construction in a minimal sleeve-style, they'll bump up the comfort and flexibility while on the bike without sacrificing protection from trail hazards. Large elastic gripper panels help keep the guards in place while riding or during impact, and the material features an antimicrobial treatment to reduce odor-causing microbes. Shred with confidence with the protection of our Launch Elite Knee Guards.
$214.95
The Launch Elite Knee/Shin Guards offer an excellent combination of impact-absorbing protection with a fit that ensures mobility while riding. The CE-certified D3O LP1 inserts provide world-leading impact protection, while the engineered SuperFabric skid panels deliver maximum durability and flexibility. Featuring extended Poron shin coverage, plus bonded Poron pods at the side of the sleeve for additional side knee coverage, these guards earn their Elite name. Lightweight, and constructed in a minimal sleeve style, they'll bump up the comfort and flexibility while on the bike without sacrificing protection from trail hazards. Large elastic gripper panels help keep the guards in place while riding or during impact, and the material features an antimicrobial treatment to reduce odor-causing microbes. Shred with confidence with the protection of our Launch Elite Knee/Shin Guards.
$159.95
The Launch Pro D3O Elbow Guards build on the legendary performance of Fox's existing guards and elevate the performance to new heights. Designed with input from Fox's elite level race team, these elbow guards utilize D30 - the worldwide leader in impact reducing materials - and combine that technology with a removable hard cap for bulletproof durability and all mountain performance. The D3O CE certified build allows the elbow guard to stay flexible for ease of movement and comfort, but upon impact, they instantly harden to provide a hard shell-like protection. The Launch Pro D3O Elbow Guards have a breathable, moisture wicking construction, so they remain comfortable all day long. - Enhanced breathability through perforated, non-toxic, hypoallergenic Ariaprene neoprene - Anatomically designed panels provide superior on-bike comfort - Moisture wicking back fabric keeps you cool and dry - Removable/replaceable hardshell front cap to reduce snagging - D3O CE certified insert for impact protection
$22.95
Replacement hard caps. Compatible with Launch Pro D3O Elbow Guards. Features - Replacement hard caps - One size fits all - Sold in pairs
$199.95
The Launch Pro D3O Knee Guards build on the legendary performance of Fox's existing guards and elevate the performance to new heights. Designed with input from Fox's elite level race team, these knee guards utilize D30 - the worldwide leader in impact reducing materials - and combines that technology with a removable hard cap for bulletproof durability and all mountain performance. The D3O CE certified build allows the knee guard to stay flexible for ease of movement and comfort, but upon impact, they instantly harden to dissipate the force of the crash. The Launch Pro D3O Knee Guards have a breathable, moisture wicking construction for all day comfort. - Enhanced breathability through perforated, non-toxic, hypoallergenic Ariaprene neoprene - Anatomically designed panels provide superior pedal efficiency and on-bike comfort - Moisture wicking back fabric keeps you cool and dry - Removable/replaceable hardshell front knee cap to reduce snagging - D3O CE certified insert for impact protection
$22.95
Replacement hard caps. Compatible with Launch Pro D3O Knee Guards. Features - Replacement hard caps - One size fits all - Sold in pairs
$17.95
Offering zero restrictions and ultimate comfort, the Pee Wee Titan Elbow Guards are a must-have for your future rider. Features - Plastic elbow and forearm coverage - Soft bio-foam chassis for comfort - Elastic strap system with hook and loop adjustment - Sold in pairs - Ages 4-7
Page 1 of 2 Next page