Bells/Noise Makers

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 23.8 – 31.8mm handlebars - Weight: 46.5g

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 22.2mm handlebars - Weight: 31.5g

Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring. - Fits handlebars with 22.2mm - 31.8mm (.87-inch - 1.25-inch) outside diameters - Dome Diameter: 44mm (1.6")

A steampunk statement for your handlebars. A transparent dome lets colorful gear workings of the insides of the bell be seen. The Gear Bell is even rainproof.

A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters

Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.

- Fits 22-25.4mm Handlebars

Fits 22-25.4mm Handlebars

- Fits 22-25.4mm Handlebars

- Fits 22-25.4mm Handlebars

Fits 22-25.4mm Handlebars

Fits 22-25.4mm Handlebars

Fits 22-25.4mm Handlebars.

- Fits 22-25.4mm Handlebars

- Fits 22-25.4mm Handlebars

Spice up your ride with the classic styling of the Diamant bell. Original replacement bell for Diamant bikes. - Cool retro style - Durable steel construction

The dB140 is the loudest bicycle horn on the market, putting you in control of your safety by letting people know you’re there. It’s small, sleek and enables you to alert distracted drivers and pedestrians to your presence. Featuring a brand-new Garmin style mount, the dB140 is better than ever: rock solid on the bars, easy to remove and interchangeable with other Garmin compatible devices. Two mounts are included to ensure a perfect fit with all handlebar sizes; one mount for bars with a diameter of 22-26mm with 4 differently sized spacers, and a second mount dedicated for 31.8mm diameter bars. - Features two sound modes: 140dB "piercing mode" or 121dB horn mode - The dB140 is an electric bike horn which requires x2 AAA batteries - Total weight: 102g

Tool-free mount attaches quickly to handlebars 19-32 mm. Aluminum 30mm diameter bell can also be mounted with a light or computer FlexTight™ bracket. - Sound Volume: 90.0dB - Handlebar size: 22-32mm - Bell Diameter: 33mm - Weight: 25g

Hit the lever once, it rings twice! Sleek and small aluminum bell. - Sound Volume: 87.0dB - Handlebar size: 22.2mm - Bell Diameter: 33mm - Weight: 27g

Aluminum bell with ribbed lever NOTE: 22.2mm diameter clamp. This bell will only fit smaller-diameter handlebars.

- Durable all steel trigger bell - Floral feminine pattern - Bell diameter: 80mm

- Stylish bike accessory for your bike through beautiful bohemian print. - Makes a resounding ding dong sound.

- Suitable for most bicycle frame styles. - Due to the clear dong sound, you're always audible to other road users. - This large bicycle bell is suitable for permanent attachment to the steering axis of your bicycle. - 80mm

- Bell diameter: 60mm

- Bell diameter: 60mm

- Durable all steel trigger bell - Polka dot pattern - Bell diameter: 80mm

- Durable all steel trigger bell - Polka dot pattern - Bell diameter: 80mm

The Basil Portland Bell Brass makes an instant impression. The timeless silver finish ensures an easy complement to almost any bicycle frame, while the bell itself is easily mounted to your frame, with no complex installation to worry about. When rung, this bell emits an audible sound that’s loud enough to alert other cyclists, motorists and pedestrians of your presence.