Parts & Accessories

Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases) - Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes

A compact remote with ANT+ wireless technology that allows for easy, on-bar control of your bike lights. Bontrager Transmitr MicroRemote allows you to wirelessly control the functions of up to four Bontrager RT lights simultaneously. This sleek, compact remote communicates with your lights using ANT+ wireless technology, mounts easily to any handlebar, and can even be used in place of a bar end plug with an additional mount. Keep your light controls within reach! - Communicates via ANT+ wireless technology - Compatible with all Bontrager RT front and rear bike lights - Can be paired with up to four lights simultaneously - Wirelessly controls light functions, including on/off and mode selection, and signals battery status - Easily mounts to handlebars, and can be used as a bar end plug (Bar End Mount sold separately) - Double-press powers on all lights; single press changes modes - Flashing LED when powered on indicates low battery in one or more connected lights - Includes CR1632 battery, handlebar mount, and quick-start manual - Battery: CR1632 (Coin) - Weight: 12g

Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Key features: - Securely attaches all Ion lights to bars - Reduces vibration and slippage - Compatible with 22.2-31.8mm diameter bars - Mount rotates left and right for optimal placement

Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts

Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Product details - Easily integrate your Bontrager Flare tail light on your Madone 9 Series - Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp

Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash

CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.

Updated and more secure clothing clip for mounting CatEye safety lights.

Replacement silicone rubber mounting strap, for use with the Hecto, Micro, and Macro LED lights.

- Can be used on arm, leg, backpack, or bike - 4-LED design for 360 visibility - Built-in passive reflective strips - Water resistant - Mode: Flashing Off - CR2032 Battery (included) - 75 hour run time - Sold individually

This adjustable mount provides an infinite range of angles and positions for handlebar placement of your Transmitr Remote. The unique CNC Aluminum design allows for convenient placement and sturdy mounting to handlebars from 31.8-22.2mm. - CNC alloy design provides light and stable mount - Allows for infinite angle adjustment - Compatible with 31.8mm - 22.2mm bars - For use with Transmitr Wireless Remote

- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long

Battery Replacement Guide For E-Lume Series Headlights: - E-Lume USL-200/250, 1-Cell Li-Ion 1400 mAh (ESB-1400) - E-Lume USL-450/500, 1-Cell Li-Ion 2200 mAh (ESB-2200) - E-Lume USL-600/650/850/900, 1-Cell Li-Ion 2600 mAh (ESB-2600) - E-Lume USL-1100/1200, 2-Cell Li-Ion 2200 mAh (ESB-4400) - E-Lume USL-1500/1600, 2-Cell Li-Ion 2600 mAh (ESB-5200) - Battery Removal/Installation Instructions Included - Allen Key Tool Included

Replacement Part – Multi Sport Headlight & Tail Light Bracket - Works for both headlights & tail lights - Great for helmet application - 3 strap sizes allows fitting from 20mm to over 100mm - Adjusts to fit aero & round seat posts & handlebars - For lights up to 120 grams in weight - Cannot be used with: TST-70, TST-100, TST-150, TBT-50R, TBT-120F, USL-200, USL-250, USL-450, USL-500

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Rear LED adapter for "D-Shaped" or flat seatposts found on select bicycles from manufacturers such as BMC, Giant and Specialized. Provides a stable, low-profile mounting surface for compatible LED lights. Compatible LEDs: - Laser Drive Rear - Strip Drive PRO Rear - KTV PRO Smart Rear - Strip Drive Rear STVZO - KTV PRO Rear - KTV Drive Rear STVZO - KTV Drive Rear

The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride. - Blendr mount allows for integrated rear light attachment - Easily and securely mounts to compatible saddles - Includes mounting hardware (2—3mm M5 bolt) - Torque included M5 mounting hardware to 2Nm

Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

For CubiCubi 1200 Lighthead - Cartridge battery - 1200 Lumens / 6000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable

Replacement Part – Aero Headlight Bracket - Works For Both Headlights & Tail Lights - 3 Strap Sizes Allows Fitting From 20mm To Over 100mm - Adjusts To Fit Aero & Round Seat Posts & Handlebars - Fits All Serfas Headlights Except: USL-200 & USL-450

End Plug For Femto USB and Stvzo Femto USB Rear

Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.

For mounting rear lights on Topeak Tubular Rack, MTX BeamRack or any rack with 80 mm (center to center) mounting holes.

Replacement battery for 2019 True Series MTB & Road headlights. Plastic storage case included.

- Flexible mounting with non-slip Velcro straps or screws for the bottle holder device - Easy transport thanks to practical holder